How to use usb internet on android. How to transfer the Internet from a phone to a computer in modern conditions

Articles and Lifehacks

How to access the Internet from a computer through a phone if you are not at home, but you urgently need to send information by e-mail? You need to connect the mobile phone to the PC so that it acts as a modem.

Connection procedure

A laptop with a mobile phone can be connected using bluetooth, infrared or cable.

To use the infrared port, you need to activate this function on both devices, place the ports against each other no more than 15 centimeters and wait until the connection appears.

To use bluetooth on a computer, you need to install a specific driver, as well as activate the ports. Connecting via cable is the easiest as it does not require installation time.

After setting up and synchronizing the cell phone with the PC, you need to set up a GPRS connection on the computer using the Start menu:

1. open the "Control Panel";
2. select the "Phone and modem" section;
3. indicate in the window that appears, the code of your city, and select your phone from the list of proposed modems;
4. go to the "Properties of the modem", there open the diagnostic section;
5. click on "Interrogate modem", wait for a response.

Create a new connection

• click "Connections", select the "Create new" section;
• find the item for setting up the connection manually and go there;
• click "Regular modem";
• select your phone from the list of modems;
• indicate the supplier's name, phone number - usually *99#;
• in the username - your own operator: beeline, mts, megafon;
• click "Finish".

• "Modem phone" - "Network", where you need to specify the parameters;
• near the points for enabling the LCP extension, as well as for coordinating multi-channel and single-channel connections, check the boxes;
• then "Properties" - checkboxes to get addresses: IP and DSN servers automatically;
• click "Advanced" - uncheck "Use compression from IP headers" and "OK".

There are situations when there is a laptop, and Internet connections via fiber optic cable no. Then the question arises whether it is possible to connect the Internet on a computer through a phone, and how to do it. A 3g / 4g modem will help to connect the network to a PC in any conditions. In the absence of such a device, a smartphone will perfectly replace it. In this article, we will look at connecting a laptop / PC to the Internet through phones with various operating systems, and we will help you set the correct parameters.

Make your phone a Wi-Fi hotspot

To connect your computer to the Internet, your smartphone will act as a . To do this, you need to set certain settings on it and make it an access point for accessing the network. But, before proceeding with the setup, check if there is Internet on the phone. If it is not available, top up your account or contact your mobile network operator. Consider setting up an access point for each OS installed on smartphones.

Android

iOS

Starting with version 4 of the OS, Apple smartphones have the ability to create a Personal Hotspot (personal access point). By wireless network up to 3 devices can be connected to the gadget at the same time.

You may also be interested in the article:

Windows phone

Before setting up a hotspot, you must connect your phone to the Internet. An icon will appear in the Control Panel.

You may also be interested in the article:

PC/laptop setup

Internet connection settings are the same as when connecting to a regular router. Just make sure the settings are in automatic mode.

On a MacBook, you only need available connections select your smartphone, enter the previously set password and wait for the gadgets to connect. When connected, the top line on the PC/laptop will show the corresponding icon in the form of two connected chain links , and the number of connected devices will be displayed on the phone.

Connecting via USB

To connect the Internet to a computer, no matter what OS is installed on your smartphone, use a USB cable to connect the switched on phone to a PC / laptop. At correct settings mobile phone, after installing the drivers, the operating system itself identifies it as a modem.

Android

iOS

Apple products connect via Wi-Fi, Bluetooth, or USB cable in the same way. The difference will be only in the last action. With this type of connection, your smart will consume a minimum amount of energy.

Just be sure to turn off tethering when you're not using it, as your phone will waste energy looking for paired devices.

Windows phone

On devices with OS Windows phone there is no function to use it as a USB modem. But you can connect it in any other way: by creating a hotspot and joining via Bluetooth or Wi-Fi.

PC/laptop setup

To connect to the telephone Internet through a computer in Windows, you must first install the drivers on your phone. They can be bundled on the disk that came with the gadget. If the disk was not available, software can be downloaded on the Internet from the manufacturer's website.

To connect an Android smartphone to a MacBook, you need to download the driver and install it. To do this, simply follow the instructions on the screen. If everything is configured correctly, then your gadget will see the modem and connect to the network.

Setting up a connection via Bluetooth

To connect your phone via a Bluetooth wireless network to a computer, you need to make sure that these modules are in working order on both devices. And only after that set up an Internet connection.

Android

All actions will be similar to the above. They should differ only in the choice of modem mode.

iOS

The steps are the same as above, except for the last one. After setting the modem mode, activate the Bluetooth module.

Within this article, the steps of using a mobile communicator as a modem are considered in order to connect a computer or laptop with Windows OS to the Network. Attention is also paid to the question of how to set up the Internet on a Chinese phone.

What you need to have to connect

Availability required mobile phone, which has a built-in 3G, EDGE or GPRS modem. Any model of a Samsung, Nokia, Sony or other brand communicator may also be suitable. You need a USB cable to connect your phone to a computer. The wire can be replaced with a Bluetooth device. It is clear that in this embodiment, the computer and phone must have the appropriate adapters. You must have a modem driver or a program to synchronize with your communicator. The software is most often delivered on a disk at the same time as the phone, and there is also an opportunity for free download of everything you need on the manufacturer's website. Requires a SIM card from the correct carrier mobile communications with a positive account balance. It is necessary that the data service is active for the SIM card. This can be found out from the operator, and when the possibility is not available, make a request to connect it. It is also necessary to define a tariff plan and configure unlimited Internet to the phone. Please inquire at the center after-sales service or on the website of the mobile operator how to make initialization and dial-in number for the communicator. They will need to be noted in the modem settings, as well as during the creation of the connection. The choice of service provider needs to be given especially more attention, because the quality and speed of the Internet connection for different providers can vary significantly. These parameters also depend on the region of residence and time of day.

How to connect

Setting up a connection when you need Internet on your phone through a computer is carried out in several stages. Install the driver and connect the phone to a PC or laptop. First of all, you need to install a synchronization program on your computer, and then connect your phone to it using a cord or via Bluetooth. When there is no connection application, but you need Internet on your phone through a computer, and there is only a folder containing driver files, you first need to connect the communicator to the PC. When the system starts installing new hardware, mark the path to this directory inside the required box.

Carrying out setup

Open access to device manager operating system. In the "Modems" section, find the model of your phone, click the "Properties" item. In the new window, go to the tab with additional communication parameters and in the column with the commands, make an initialization string. Then press the consent button. As mentioned earlier, all the necessary data, if you need Internet on your phone through a computer, you need to find out in service center. Of course, the initialization string will determine which service can be used. As a rule, for each tariff plan provides its own parameter.

How to create a connection

The procedure for accessing the Internet on your phone through a computer at this stage depends on the version of Windows. In the "Start" menu, go along the path: "Control Panel", then "Network and Internet Connections". In the next step, double-click on the Wizard icon. In the first window, click Next. In "Type network connection» check the box «To the Internet». Click "Next". In the next step, select "Manual connection settings". Next, consider the procedure for setting up the Internet on a Chinese communicator. We will describe necessary actions on the example of the MegaFon network and a copy of the iPhone smartphone from China. The setup procedure is typical for all major telecom operators. Must be ordered by special number automatic settings, and then save them. Thus, it does not matter which manufacturer's phone you use. If you are a MegaFon subscriber, you can always call the customer service at 0500 in order to get the settings for the communicator. Provide the operator with the required data. As a result of the conversation, you will receive a message on your phone with the necessary settings.

The article is relevant for 2010, modern Android can do this with one “tick” in the settings
After buying HTC Hero, I had a question: how to get Internet on the communicator through a computer? With my previous Toshiba G900 communicator running WindowsMobile 6, everything was simple: I installed the "Mobile Device Center", and the Internet appeared on the communicator. “This function is not needed,” you say, because now there are many Wi-Fi access points through which you can connect with two clicks. But personally, I don’t have a Wi-Fi point (I have a laptop, but Android does not detect Ad-hos networks). So I was disappointed by the lack of this feature. All my attempts to find manuals on this topic have been unsuccessful. So I solved it myself.
Attention: The user must be root to operate the scabbard.

Setting up a network between your device and a computer

• Built-in USB Tether (devices with Sence and may have some other
• USB Tether implemented by third-party software.

Setting up the communicator

Create a new script in the GScript Lite program, write there:
ifconfig rmnet0 down
ifconfig usb0 up
route add default gw 172.20.23.253 dev usb0
setprop net.dns1 8.8.8.8

8.8.8.8 is the DNS server from google. I love using it, so I use it here too. You can use any DNS server you wish.

The setup is complete, you can test:

1. We connect USB
2. Turn on the Wired Tether program, turn on the connection
3. Turn on GScript Lite, execute the script we created
4. PROFIT!

Upd: For those who can not cope with setting up routing on Windows, I can advise WinRoute from Kerio. It also works through it, and all its configuration consists in specifying a network connected to the Internet. Screenshot

Upd2: Rewrote the article, it became universal and without problems. Thanks to "Corwin" for pointing out the error in the script leading to "invalid argument"

There are many people in the world who use mobile Internet. It allows you to access the network from almost anywhere in the world and feel free, regardless of the presence of other devices, except for a mobile phone or tablet. Therefore, we will consider in detail how to quickly and correctly connect the Internet on a computer via a phone using USB or Wi-Fi.

What you need to connect

With the development of mobile network standards, 2G and 3G have become the most popular. The most modern is the 4G standard, which is slowly starting to take part of the market. But still, due to the low level of coverage of the territory with appropriate equipment, most users work with 3G, within which it is customary to allocate networks:

• CDMA2000 1xEV-DV (CDMA2000 1xEvolution Data and Voice);
• GPRS (General Packed Radio Services);
• WCDMA (Wideband Code Division Multiple Access);
• EDGE (Enhanced Data rates for Global Evolution);
• HSDPA (High-Speed ​​Downlink Packet Access);

Moreover, to connect to the Internet, you do not need separate wires and modems, you only need a SIM card with a positive balance or paid traffic. To improve the quality of the connection, you can use an ExpressCard modem, and a USB modem, and a PCMCIA modem.

Let's now consider several options - you have an Android device or a regular mobile phone. In the first case, it is customary to single out several methods.

Connect to the Internet using Wi-Fi

Specifically, we will not comment on the connection of the device to the global network here - there are instructions from mobile operators for this. The process itself is quite easy - you just need to activate the sent Internet settings, if necessary - configure the tariff parameters.

Now let's analyze the conditions for connecting via Wi-Fi - all devices must be equipped with Wi-Fi modules - both a laptop (or computer) and a tablet (or smartphone). Now that we have everything ready to connect, go to the mobile device and look for the “Wi-Fi access point” setting item on it. It can be located anywhere, it all depends on the firmware of the android device. Usually it is found either through the "Wireless Network", or through the "Network", "System". Inside them should be either "Modem Mode" or "Access Point".

Next, click on the menu we need, inside we open “Access point settings”. An adjustment field will appear - we write the desired name, select the WPA2 PSK protection type, set a password (or do not set it - it depends on desire), turn on the access point.

Now let's go to the computer - we activate the search for all available WAP points (Wireless Access Point - Wireless Access Point), look for our device and connect. A small remark - the radius of connection to the WAP access point is approximately 50 meters, but, for example, a concrete wall reduces the strength of the wave by 40%. Therefore, it is better that the Internet source is within sight of the computer.

How to connect to the Internet using a USB connection

In the case of connecting an Internet computer via a USB port with a phone, the main need is a positive balance on the SIM card and a conductor. The biggest advantage of this type of Internet is the uselessness of installing any drivers on the computer - you can install it yourself. It is usually used when there is no Wi-Fi module on a computer or laptop. But first, it’s worth warning you, reader, that the Internet on a computer consumes many times more traffic than mobile Internet. And if you pay one price for 1 GB of Internet through your phone, which would be enough for you for a month, then with the help of a computer it will end much faster.

Important! Therefore, it is better to disable all applications that you will not use while working with mobile Internet.

And when connecting, you must be very careful to ensure that there is no interruption in communication between the smartphone and the operator.

Let's proceed directly to the connection. First of all, turn on the Internet on your mobile device and check the connection. Everything is okay? Move on! We connect the mobile device to the computer using a USB conductor. We go into the settings, look for the item "Configuration of network modules" in them (usually it is located under the article "More"). We turn on there "debugging via USB modem".

Now let's get to work on the computer. Most likely, the driver installation will begin immediately - you will need to answer a few questions about allowing your computer to connect to the World Wide Web and preferences in standards and network modules. After that, it will be enough to wait for the installation to complete and connect to the network. But in the case of older versions of Windows, everything is not so simple - most likely, you will have to look for the driver on the Internet or from friends. If the box from the device is not lost, then there may be a driver on the disk in it. That's probably the whole installation of an android device as a modem.

How to connect via regular phone with USB

First you need to check if you have everything to connect.

Let's go through the list:

1. Mobile phone with EDGE, GPRS, or 3G modem. Almost all modern phones have this thing.
2. A program for synchronizing devices - a computer and a phone. Usually this is either a separate application or a driver from the disk that comes with the phone in the box. If there is no disk, download the application on the official website of your phone manufacturer.
3. USB cable or cord.
4. SIM card of any operator. It must contain either the corresponding amount of money, or already paid traffic for the Internet. Also, in the settings of the SIM card, the “data service” item must be activated. If it is not enabled, enable it. This can be done by calling the operator.
5. Dialing number and initialization string of your personal account. The first one looks like this "*99*1#" or "*99***#". The line looks like this AT+CGDCONT=1,"IP","usluga", instead of usluga there will be a certain value assigned to the tariff plan. All this can be found either in the service center or on the operator's website.

Do you have everything? Let's start the installation process:

1. Install the necessary drivers. They must be available in advance, and we repeat once again that you can find them on the official websites of phone manufacturers.
2. We create a connection between the phone and the computer. We go into the "Task Manager" window, find the "Modems" section, look for the phone we need, press the right mouse button and go to "Properties".
3. In the window there should be a line "Additional communication parameters". We go to this section, inside there will be a line “Additional initialization parameters” and enter our initialization string into it. This is necessary in order for everything to work according to the desired tariff.
4. Now we need to create a new connection. It is always created through the control panel, inside which there is an item "Create a new connection". In the window that appears, fill in the phone data and the dial-up number. Usually you are also asked to give a name and password - this should not be done. It does not bring any dividends to the user.

That's it, you now have an internet connection ready. Now you can connect every time either through the "Network Connections", which are located in the "Control Panel" window. For the convenience of the user, you can make a shortcut to the icon on the desktop.