Do-it-yourself stand made of fiberboard. How to make an information stand with your own hands

Children are indefatigable dreamers, and their activities can endlessly touch and delight adults. When the results of creativity are in a clearly visible specially designated place, young fidgets are delighted.

Exhibition board equipment is not always associated with large cash outlays. Any interested parent is able to make children's stands with their own hands.

How to choose the right material

Among the large assortment of modern stands, more and more consumers opt for cork boards. They are easy to use, reliable, durable, affordable.

Natural material - cork oak bark - satisfies general requirements safety for children's products and has a number of positive qualities:

ecologicaly clean;
easy to clean, does not attract dust;
moisture resistant;
refractory;
chemical resistant;
not damaged by fungus, insects;
not electrified;
shockproof;
wear-resistant.

Cork stands will be a win-win option for both home and kindergarten.

How to make a stand

You do not need to have special craft skills and knowledge to please yourself and your children with a functional novelty in the house.

Think in advance how to harmoniously fit the new stand into the interior.

You can experiment both with the color of the board itself - paint it or upholster it with a fabric of the desired color, and with the frame, choosing the best combination.

The frame is usually made of wood, plastic, metal profile. It is also advised to use cable channels, the width of which is slightly greater than the thickness of the board.

Choose the type of wall mount for the stand: non-removable version with glue or free hanging on hinges.

The minimum set of blanks and tools used, 30 minutes of work - and the result will be on the wall.

Determine the desired dimensions of the stand, prepare a cork sheet to fit.

Choose the material for the back wall - plywood, fiberboard.

Glue both sheets. Glue - liquid nails, you can use another. Degrease the surface first, after applying the glue, press the parts tightly against each other. If desired, cover the working surface of the stand with a cloth.

Attach the previously prepared frame to the base. At will - attach with reverse side fastening loops.

Fix the stand to the wall with glue or double-sided tape for a non-removable option. For alternative way- hang on loops.

How to rationally use the stand

After you have made a stand with your own hands, you can begin to actively exploit it.

Note!

There are two main formatting methods. You can fix pockets on the surface of the board. These can be files for papers, or transparent pieces of thin plexiglass, fixed on double-sided tape.

This type of design is used for information stands.

Sheets of paper are placed in the pockets with important information that parents should know about the working hours, routine, rules of behavior for children in kindergarten.

The information can be updated daily (food menu) or as needed.

Stands are actively used by people different ages both at work and at home. Reminders of important events, planning for the near future, pleasant memories captured in photographs, visualization of your desires, a convenient organizer - everyone will independently add the most relevant for themselves to the list of useful functions.

On display stands made of cork necessary items- photographs, pictures, paper notes, small souvenirs are fastened with buttons, pins, tailor's needles.

Note!

The surface of the board does not suffer from this, there are no holes visible to the eye. When designing a stand for children, you need to make sure that sharp objects cannot harm the kids.

The stand, on which educators attach the results of children's work for the day, is always popular with caring parents. And the children are happy to present new crafts and arrange mini-exhibitions already in the apartment.

Take a photo of the filled stand as a souvenir, and let it be constantly updated - the world of children's imagination is inexhaustible.

DIY booth photo

Note!

Anna Svetlichnaya

Dear colleagues!

In connection with the introduction of the Federal State Educational Standard, the task educator organize work with parents, one of the forms of which is information corners. I want to bring to your attention stand making master class"Nobody is forgotten, nothing is forgotten!"

First, we need to develop a layout. I did it in PowerPoint

To work we need...

Width of our stand 1 meter, i.e. 2 tiles.

Since the layout is 4 wavy stripes, then 1 template is suitable for both the concave and the convex part, only upside down.

Apply the template to tiles, circle with a pencil.

top cut tiles

and apply to the bottom of the part, combine, so that the cut coincides, and when we assemble booth I didn't have to tweak the details.

We turn the part over, circle it and cut it out from another tiles, then the details will match.

Details are best numbered immediately with reverse side. Thus, 4 strips are cut, each of which consists of 2 parts.

For painting, mix color with PVA glue, achieving the desired shade. We color the parts according to the numbering, not forgetting to paint over the edges.

Name booth typing on a computer, making templates, tracing and cutting out tiles.

We also need flowers. We make a template.

We will have flowers voluminous. To do this, we will have to cut the template several times.

First, cut off the cup from the flower. We circle on tile received details.

Then we cut the cup into 2 parts, circle the smaller one, cut it out.

We cut off the upper part from the flower template, circle the resulting part on tiles.

We cut off another part of the template and circle the very bottom of the flower on tiles.

It turns out bulk flower.

Now let's paint all the details with the desired color. When the paint is dry glue it together "The Dragon". Details of flowers are glued together on the reverse side with scraps tiles.

More for making booth we need the Eternal Flame. In our case, the picture is cut out, glued with a pencil glue and laminated with adhesive tape. Cut out with a clerical knife, retreating from the edge of the picture a couple of mm.

Now we will deal with the pockets that are needed to place information. They can be made from: files, corners, folders, or you can buy ready-made ones. We will make pockets from folders. The folder needs to be cut.

With the help of self-adhesive paper, we make a frame. Paste on the reverse side Double-sided tape.

Now let's collect our stand. Parts are fastened together on the reverse side with scraps tiles and glue"The Dragon".Then we place our details on it: pockets, flowers, letters and Eternal Flame. Fill in the pockets with information.

What are information boards made of? This question is asked by those who, for one reason or another, need to make an information stand. In this article I will try to explain in detail from what, and most importantly, how information stands are made.

So, let's begin. The main thing in the information stand is its basis. It depends on how long the stand will last. The main material for the stand is PVC (sheet plastic). But not all plastics are the same! For example, "Chinese"-made plastics have a more porous structure and, as a result, are more brittle than plastics (PVC) produced in Germany, Hungary, and Israel. AT recent times became very popular plastics (PVC) Russian manufacturers, the quality of which also leaves much to be desired. So what is the difference between "Chinese" plastics (PVC) and non-Chinese ones? Everything is very simple. The difference is in the quality of the plastic itself (PVC)! As is known all polymer-containing materials (plastic and plastic materials, including self-adhesive films) - cellular polycarbonate, PVC plastic, plexiglass, polystyrene can change their appearance under the influence different temperatures. So "Chinese" plastic (PVC) is the most subject to change. It is very brittle at low temperatures (from 0°C), and too soft at high temperatures (+25°C and above) and as a result of change appearance very noticeable. If over time your stand has become "wavy", or a corner has broken off during installation, you should know that Chinese plastic was used in the production of your stand.

The second, no less important component information stand are the pockets (files) located on the base. Pockets are made of organic glass (PMMA), transparent polyethylene (PET) or transparent plastic (PVC), and are attached to the base with double-sided tape or special glue (depending on the purpose of the information stand). To date, the most popular material for the manufacture of pockets (files) is transparent PVC with a thickness of 0.6 mm. This is a fairly durable material and at the same time it is relatively inexpensive, for example, than a pocket made of plexiglass (PMMA). When designing an information stand, it is important to consider the size of the pocket, as it is different from the size of the sheet placed inside it! So, for example, a pocket for an A4 sheet (210x297) will have a size of (225x305) mm. Specialists of the company "Obavoka" will be happy to help you in the development of information stands for your tasks!

The third component of the booth is its "cap", the name of the booth. The hat is made of PVC film of various colors using plotter cutting or large format printing.

I would like to say that this is it, the stand is ready! But it's not. The most important thing is ahead - to make an information stand with your own hands!

First you need to make a sketch of the future stand, observing the dimensions and placement of pockets on the stand. It is important to consider the distance between the pockets and the indentation from the edge of the base. It is recommended to make a distance between pockets of 20 mm in horizontal and vertical rows. Indent from the edge of the base to the pocket 30 mm. The booth cap usually has a height of 100 mm.

From the tool: a metal square, a stationery knife, a felt squeegee (you can do without it), a metal ruler.

Let's get started!

Using a square, we make markings on the sheet material, since it is important that the stand is "in the corner", and cut out the base with a clerical knife and a metal ruler. To do this, we apply the ruler to the markup and use a clerical knife to make a cut. It is important not to try to cut the material the first time, otherwise you can ruin the base. With smooth movements, draw a clerical knife along the ruler, each time increasing the pressure on the blade. Then the cut will turn out even and neat. Repeat the action on four sides.

Next, we apply (roll) a hat. To do this, place the cap (sticker) at the top of the base and fix it with a small weight, such as a small weight. At the same time, turn the base itself with the upper part towards you, for convenience. While pressing the sticker against the base with your left hand, gently lift the right side of the sticker from the base by about 10 centimeters. Separate the backing from the sticker by 5 centimeters and fold it inward. Using a felt squeegee, roll the separated part of the cap to the base. Next, gradually removing the substrate, apply a cap to the base.

Remaining pockets. We take a ruler and mark out the location of the pockets on the basis of the stand. Next, we place the pockets on the basis, according to the markup. Pressing the pocket firmly against the base with your left hand, lift the edge of the pocket with your right hand and remove the protective tape from the adhesive tape, after which we fix the edge of the pocket on the base by pressing the edge of the pocket with your right hand. The pocket is fixed. We do the same with the two remaining sides of the pocket and the rest of the pockets on the stand!

That's all! Your stand is ready! It remains to place it indoors.

PS. The company "Obavoka" uses sheet plastics (PVC) for the manufacture of stands only of high quality world brands! Also in our company you can buy sheet plastic for stands, pockets for stands and caps for them.

Now you understand what stands for schools are made of, information stands for hospitals, information stands for parents in kindergarten, an information stand at an enterprise, a stand for kindergarten.

If you want to order ready-made stands - please contact our company! We use only high-quality materials, and your stand can be made very quickly! In some cases, within a few hours!

I hope that this information was helpful to you!

In this article, we will look at how to make a stand with your own hands With minimal cost. But first, let's figure out what an information stand is and where it is used.

Can not imagine modern life without information boards. They are everywhere - in kindergartens, schools, various public institutions, shops, office buildings, on the streets, and even in elevators. An information stand is the best and best option to convey the necessary information to people. With the help of such a stand, you can not only inform the population, but it is also an excellent advertising tool. But what if you have a very small budget, and you really need a stand? Well, of course, you can make an information stand with your own hands. To do this, you do not need large investments, you can use improvised materials that are in almost every home, the most important thing is creativity and a little patience. A little lower we will talk about creating a stand in stages and how to make pockets for a stand with your own hands.

How to start making a stand

First you need to decide for what purposes you want to make a stand with your own hands and in what room it will be used. An information stand is a board with or without several pockets, on which certain information material is placed. Let's say you decide to make a stand with your own hands for grocery store. The first stage - we determine the dimensions, based on the dimensions of the wall on which it will be placed. After you need to think about the shape and color scheme. The standard shape is a rectangle or square, but if you want a little creativity, you can, for example, use the shape of a product. It is better to choose corporate colors if you do not have corporate identity, choose contrasting bright colors that will attract the attention of visitors. Do not use a large number of colors on one stand, it will turn out too colorful and tasteless. The next step is the selection of the material from which you will make the stand. Most often, a 3-5 mm PVC sheet or cellular polycarbonate is taken as the basis. For filling, you can use the image on the self-adhesive film or any image. You can decorate and decorate pockets beautifully with the help of plastic or wooden plinths, as well as add three-dimensional letters that are sold in art or hardware stores. And now let's move on to the most interesting thing - cutting out the shape to a certain size and arranging all the elements. Now you know how to make a stand with your own hands according to the original sketch without spending huge money. But if needlework is not your topic and there is absolutely no time for it, then you can easily with us at low prices. We will create an original stand design for you and produce it in a short time.

Instructions on how to make an information stand with your own hands

There are a lot of articles on the Internet on how to make a stand with your own hands, you can choose for every taste and color and any topic that interests you. Let's try to make a stand with our own hands and I will show you with an example that it is very easy and not at all expensive. In order to make a do-it-yourself stand for a kindergarten, for example, we need:

PVC sheet 3 mm for the base
stickers or pictures
stationery knife
ruler
pencil
acrylic paints
dense files
plinth pieces

On a PVC sheet, we draw the shape we are interested in according to the given dimensions. Carefully cut it out along the contour, by the way, PVC is very easy to cut with a clerical knife, and you do not need any special tools. Further acrylic paints paint over the background of the base, it is desirable to pre-degrease the pvc, the paint will be easier to apply. When the base dries, we outline with a pencil where we will have pockets and pictures. Cut the plinth to the size of the file and glue everything to the marked places on the pvc. It turns out a convenient pocket with a beautiful frame. If you want a certain frame color, simply apply several coats of paint to the pieces of the prepared plinth and, after drying, glue to the base. Next, glue pictures or stickers. Everything, a beautiful, comfortable stand is ready. Simply hang it on the wall with a screwdriver and enjoy using your creation.

Now you know how to make a stand with your own hands, and most importantly - inexpensively and from those materials that can be found even at home. But remember, if you are making displays for kindergarten, use materials that will not be harmful to children. Depending on your needs, you can create beautiful, bright, and most importantly original stands for any purpose and it is not necessary to be a super master for this.

The first step in creating a booth is choosing the material for its base.

Cork board - in the first place among all materials. Differs in affordability, its practicality. The basis of this material will last more than one year.

Stands for children's institutions are made from the cork oak bark. The material is safe for health and has a number of other advantages:

moisture resistance;
resists mechanical influences;
withstand impact force;
resistance to chemicals;
resistance to fire;
full resistance to the appearance of fungi and mold;
ease of maintaining cleanliness on the surface;
long term services.

The reverse side of the stand can be plywood and fiberboard.

The algorithm for performing work on the manufacture of the stand

Stands are made of 3 types:

The simplest design with a minimum number of elements.
Complex design with large quantity elements.
The combined design consists of pictures, objects and text.

It is important to choose a place that will be well lit and for everyone to see. Visually imagine that the stand will fit perfectly into the interior of the room.
Flowers are welcome. But the edging on the stand should fit into its overall design in color.
The frame of the stand can be made of plastic strips, wooden slats. A metal profile is used.
A strong fastening mechanism is very important.
In the process, you will need tools, including a knife with a sharp blade. They need to be prepared.
Based on the location of the future stand, you can determine its size.
Cork wood is cut to the selected dimensions.
The cork board with the back side material is glued together with “liquid nails”. Before that, they are degreased.
The resulting base of the stand can be covered with material.
A frame is attached to the front.
Loops for a removable version of the stand are attached to the back side.
If the stand will not be removed from the wall, then it can be placed on the wall using double-sided tape.
The stand is ready for registration.

A very easy way to create a stand for information sheets, posters, announcements with the help of a ceiling skirting board. The material is affordable. One plinth strip is the top of the stand, the second strip will be the bottom border. Between them there is a gap to the height of an A4 sheet. Sheets with information are attached to the strips with buttons or pins.

If you need to place a large amount of information in a small space, then a stand-book will be an ideal option. It is called a demo system or a system for demonstrating information. Such stands are common at railway stations, bank premises, exhibition halls, shopping centers.

They differ in location: wall, floor, desktop and universal stands. But such stands can also be organized for the exhibition of creative drawings at school and in kindergarten.

Base design

The design of the base must begin with "pockets". Pieces of plexiglass and files are used as the main material for them. They are attached with double sided tape. The number of "pockets" directly depends on the size of the base of the stand itself.

For information boards, the design of the "pocket" is more necessary. For example, a board with information about the menu: the information sheet changes in the “pocket” every day. You can create an information board about the schedule of performances of children's groups, duty in the school class of students, passing exams at an educational institution.

Choose a stand theme: School of Music and her studying proccess; corner healthy lifestyle life; congratulations on the holiday and many other options. The heading of the stand should be brightly designed. It can be compared with calling card. Therefore, a bright design and a catchy name will not hurt. Letters can be cut from plastic or printed matter.
The stand can be with information about future events and with reporting information, a “pocket” for wishes and suggestions can be created.
Information sheets are attached to the base of the stand using buttons, pins. But with these tools you need to be careful in children's institutions.

Tip: bright pictures will help convey information. Especially if this needs to be conveyed to children. But they must correspond to the subject of the text. Heroes from cartoons will help bring information closer.

Information stands are placed in places with high traffic. Stands with information of an entertaining nature should be in places of recreation where children relax and communicate more.
A stand on which the creative achievements of children are placed can also be placed at home. The child will be able to share his victories with his parents. To create such a corner, you do not need to have great skills at all. But for the family, this is a big push for unity.
There is another type of stand - a demonstration stand. Their function: to act as exhibition shelves for photographs, souvenirs, pictures. Shelves can be either wooden without a base wall or with plexiglass attached to the base.

In a family where a baby has just been born, you can create a stand-memory. And fix every minute of changes in the life of the baby on it. Closer to the first anniversary of the baby, a whole folder of interesting material will be collected, which will remind you of the minutes of his growth.

It can take about 30 minutes to make the simplest stand. With a complex design, you will need to tinker. But the result will please you, and others will treat you with a sense of gratitude.